Order online or Call Now 0870 220 3221, Available without Sat Nav
How to connect this model with Steering Wheel Control function
Please note this is an explanation only we strongly recommend you use a professional fitter for your
product, poor wires can cause fires, poor fitting can void warranty.
1) Our Unit has 3 cables for the steering wheel function (GND cable, Key 1 and Key 2 cable)
a) GND cable connects to negative
b) Key 1 and Key 2 cable connect to the vehicle to get the function for the buttons on the steering wheel
2) First, Uninstall the original head unit from the vehicle
3) Unplug all the cables
4) All the cables have different functions on the harness (installer should know which cables for the speakers, power and radio antenna.)
5) The rest of the cables are for the steering wheel control function.
How to find out the steering wheel control function
on the vehicles
Use a multi meter to touch any 2 of the cables, then press any button on the steering wheel. Until the beep sound is �On� on the multi meter, then that means those 2 cables are for the steering wheel control, if no beep sound when try the first 2 cables, then try the rest of the two cables until got the beep sounds
Once found the cables (2 or 3) on different vehicles
Then just connect those cables from the vehicles to the key 1 and key 2 cable on our unit, then go to the steering wheel setup page on our unit, and set the function for all the buttons on the steering wheel controls to our unit
Remarks:
Our unit is only compatible to the analogue
steering wheel control (80% on the market),
The digital steering wheel control
will be required with a filter available soon.